|
商品の詳細:
|
| サイズ: | 120*40mm | 力: | 10w |
|---|---|---|---|
| 電圧: | 12V | 内腔: | 120-130lm/w |
| CRI: | >80 | 保証: | 3年 |
| 寿命: | 50000時間 | 証明書: | セリウムROHS LM-80 |
| 適用: | 段階の照明 | 破片のブランド: | Bridgeluxの破片Sanan |
| 色: | 赤い青緑の白 | ||
| ハイライト: | 12v 10W車LEDの穂軸,12v車LEDの穂軸,導かれた破片10w 12v |
||
Characteristics
Absolute Maximum Ratings
This lamp bead is constant voltage, mainly used for the lighting of flashlights and car lights. Conveniently powered for hours with 3 AAA batteries or a single rechargeable battery. It is easy for use around the house, dog walking, or camping. It is compact enough to fit in your pocket, backpack, or purse allowing for easy storage and quick access. Suitable for use in rain, snow, or emergency situations.
Product Introduction
1-1 Features
◆ Mechanical Dimensions : 120x 10 x1.7(mm)
◆ Package Structure :Aluminium Base Chip on Board
◆ CRI(Ra): Min.70/ Min.80/ Min.90
◆ Nominal CCT : 2700K/ 3000K/ 4000K/ 6000K
◆ Chromaticity Range : 3-step MacAdam Ellipse
◆ RoHS compliant
◆ Better die arrangement for optics
◆ Wide range of luminous flux and high efficacy
Stage Lighting
Electro Optical Characteristics
| Product Code | Nominal CCT | CRI(Ra) | Luminous Flux(lm) | Efficacy ( lm/W ) | Forward Current | Voltage (V) | |
| Ra | R9 | ||||||
| Min | Min | Min. | Typ. | Typ. | (mA) | Min. | Typ. | Max. | ||
|
XCT3830-H1510 /1228-A3095-A 31 |
3000K |
95 |
90 |
5230 |
5300 |
90-95 |
1500 |
38 |
38.5 |
39 |
| R | / | / | / | 2220 | 2300 | 620 | 625 | 1500 | 34.5 | 35 | 35.5 |
| G | / | / | / | 3240 | 3300 | 520 | 525 | 1500 | 34.5 | 35 | 35.5 |
| B | / | / | / | 850 | 870 | 453 | 455 | 1500 | 37 | 37.5 | 38 |
Chromaticity Characteristics
|
Color Region |
Nominal CCT |
Center Point (x,y) |
Oval parameter | ||
|
Major Axis a |
Minor Axis b |
Ellipse Rotation Angle θ |
|||
|
3-step MacAdam ellipse |
2700K | ( | 0.4577 | ,0.4098 | ) | 0.00774 | 0.00411 | 57.28 |
| 3000K | ( | 0.4339 | ,0.4032 | ) | 0.00834 | 0.00408 | 53.17 | |
| 3500K | ( | 0.4078 | ,0.3929 | ) | 0.00951 | 0.00417 | 52.97 | |
| 4000K | ( | 0.3818 | ,0.3796 | ) | 0.00939 | 0.00402 | 54.00 | |
| 5000K | ( | 0.3446 | ,0.3551 | ) | 0.00822 | 0.00354 | 59.62 | |
| 6000K | ( | 0.3228 | ,0.3329 | ) | 0.00760 | 0.00296 | 59.46 |
Mechanical Dimensions
Application
Features:
*.Color region stay within MacAdam 3-step ellipse from the chromaticity center.
*.The chromaticity center refers to ANSI C78.377:2011. Please refer to ANSI C78. 377 for the chromaticity center.
*.θ is the angle between the major axis of the ellipse and the x-axis, and a and b are the major and minor semi-axes of an ellipse. (Ref. IEC 60081:1997 AnnexD)
User Manuel
1. Storage
To avoid moisture, we recommend storage conditions for the unopened LED +5 ~ +30℃ rela-tive humidity <60%. LED should be used within 168 Hrs. of opening the package. Please make sure to dehumidify and vacuum pack the remaining/ unused LED. Dehumidifying condition:
+120℃±5℃ of 4Hrs. Effective age for the sealed led is one year.
2. The soldering precautions
Soldering conditions: Reflow soldering is not recommended for this LED. If hand soldering, set sol-dering iron temperature at 350℃ and soldering time not More than 5 seconds, after the first soldering, make sure the substrate surface temperature returns to ambient temperature before a second soldering. Please. make sure when soldering, there is no external force on the soldering surface and silicon batardeau (such as pressure, friction or sharp metal nails, etc.), to avoid gold wire deformation or dam-age and other abnormalities. If beyond recommended conditions, we cannot guarantee the LED stability, please do the risk assessment first. During assembly, please ensure that a good quality thermal paste is applied and distributed evenly over the surface. While using thermal pad (Heat Sink), make sure LED is firmly tightened and there is no gap between surfaces. In such heat-media products, through a pressure test of at least 500 volts.
3. Anti-static measures
Please take adequate measures to prevent electrostatic generation, such as wearing electrostatic ring or anti-static fingerstall etc; any relative products like plant equipment, machinery, carrier and transpor-tation units shall be connected to discharging unit/ ground. The ESD sensitivity of this product is > 1000V(HBM), after assembly the final lamp, please make sure to discharge Static Electricity by proper ESD equipment.
4. Temperature control
Recommended temperature conditions for enhanced product life: Be sure to TS point (negative pads) controlled below 85℃, COB recommendation colloid surface temperature control ≤150℃.
5. The drive control
Drive this product at constant current. Output current range specifications should be ac-cording to the operational and other conditions, as mentioned in data sheet. Before using a constant voltage source or altered specifications other than recommended, please consider risk factors.
Trade Show
FAQ
Q1. Can I have a sample order for 3w bridgelux led diode?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for 3w bridgelux led diode?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for 3w bridgelux led diode?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 2-3 years warranty to our products.
Q7: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%. Secondly, during the guarantee period, we will send new chips
コンタクトパーソン: Skye Lin
電話番号: 8613476793642
